Частые вопросы
Вопросы, которые люди действительно задают.
В том числе тот, которого большинство страниц о размерах избегает: насколько это на самом деле точно?
Насколько точен онлайн-измеритель колец?
Хорошо откалиброванный экранный измеритель даёт около ±0,4 американского размера, когда вы измеряете существующее кольцо, и около ±0,65, когда измеряете голый палец. Предел не в математике, а в физике. При обычной плотности экрана один пиксель отклонения — это уже примерно пятая часть размера, а карта, лежащая чуть наискось, измеряется короче. Мы показываем погрешность вместе с каждым результатом, а не голое число.
Зачем вообще калибровать экран?
Браузер никак не может знать, каков ваш экран физически. Одно и то же изображение имеет разное число миллиметров на телефоне, ноутбуке и 4K-мониторе. Любой измеритель, который рисует круг, не попросив сначала откалибровать, просто гадает, — а таблица, напечатанная в неверном масштабе, хуже, чем её отсутствие.
У меня нет банковской карты. Что ещё можно использовать?
Хорошо работает монета вашей валюты: выберите свою из списка, и мы возьмём её опубликованный диаметр. Подойдёт и лист A4 или Letter, на телефоне сложенный дважды. Можно воспользоваться линейкой или позволить нам заполнить масштаб по модели вашего устройства, а затем его подтвердить. Наличие карты не является чем-то само собой разумеющимся, и измеритель, который это предполагает, не по-настоящему глобален.
Портит ли масштаб браузера измерение?
Да, и в других местах это частая причина неверных размеров. Масштабирование меняет физический размер CSS-пикселя, поэтому калибровка, сделанная до него, больше не действует. Наш измеритель замечает изменение и просит откалибровать заново, вместо того чтобы тихо выдать вам неверное число.
Чем отличаются американские, британские и европейские размеры?
Они измеряют разное. Американский размер — это позиция на шкале, растущей ровно на 0,8128 мм внутреннего диаметра за шаг. Британский размер — буква на шкале, растущей на 1,25 мм окружности за шаг. Размер ISO/ЕС — это просто внутренняя окружность в миллиметрах. Поскольку шаги разные, целые размеры одной системы редко попадают на целые размеры другой — американский 6 это британский L½, а не ровная буква.
Как узнать чей-то размер кольца, не спрашивая?
Одолжите кольцо, которое человек уже носит на нужном пальце, и измерьте внутренний диаметр — это самый надёжный путь. Если не выйдет, вдавите одно из их колец в мыло или глину, чтобы поймать внутреннюю кромку, или обведите внутренний край на бумаге. Если и это невозможно, сравните их палец со своим и измерьте свой. Средние взрослые размеры — американский 6–6,5 у женщин и 9–10 у мужчин, но считайте это запасным вариантом, а не планом.
Брать ли размер больше для широкой шинки?
Обычно да. Широкая шинка касается большей части пальца и сидит плотнее при том же внутреннем диаметре. Примерно до 4 мм это практически не важно. При 6 мм вы поднимаетесь примерно на четверть размера, при 8–9 мм — примерно на половину. Наш измеритель применяет это за вас, как только вы зададите ширину шинки, — а для внутренней поверхности comfort fit всё работает наоборот, потому что такие кольца сидят свободнее.
Я между двумя размерами. Какой выбрать?
Практически всегда больший. Чуть свободное кольцо можно сузить, подложить вставку или добавить шарики-фиксаторы. Кольцо, которое не проходит через сустав, бесполезно, а снимать его силой — риск защемить палец. Исключение — очень широкая или тяжёлая шинка, где свободная посадка будет проворачиваться и сползать; там берите размер потеснее.
В какое время суток лучше измерять?
Ближе к вечеру или вечером, при обычной комнатной температуре, когда руки ни замёрзшие, ни отёкшие. Пальцы самые тонкие сразу после сна и после холода, а самые толстые после жары, соли, нагрузки или долгого перелёта. Измерение ближе к вашему дневному среднему даёт кольцо, подходящее большую часть часов бодрствования.
Различаются ли размеры между моими руками?
Обычно да. Доминирующая рука, как правило, чуть больше, часто примерно на полразмера. Измеряйте именно тот палец и именно на той руке, где будет носиться кольцо, — и помните, что пальцы одной руки тоже различаются между собой.
Какие национальные стандарты вы поддерживаете?
Все одиннадцать основных: США и Канаду, Великобританию и страны шкалы Wheatsheaf, Европу по ISO 8653, Францию, Германию и Нидерланды, Россию, Италию вместе с Испанией и Швейцарией, Бразилию, Японию, Китай и Индию. Каждый стандарт вычисляется из опубликованного определения соответствующей страны, а не берётся из таблицы, поэтому переводы согласованы между собой.
Отправляется ли моё измерение куда-либо?
Нет. Все вычисления идут в вашем браузере, а калибровка сохраняется только в локальном хранилище вашего устройства, чтобы не делать её заново. Нет ни учётной записи, ни загрузки, и на нашей стороне нечего удалять.
Можно ли доверять напечатанному измерителю?
Только если сначала проверить масштаб. «Вписать в страницу» по умолчанию включено во многих окнах печати и уменьшает лист на несколько процентов — достаточно, чтобы сдвинуть каждый размер на нём больше чем на целый размер. Наш измеритель для печати содержит квадрат 50 мм, который вы измеряете, прежде чем что-либо резать.
Что делать, если крупный сустав ставит меня между размерами?
Выберите размер, при котором кольцо проходит через сустав, а затем зафиксируйте его, чтобы не проворачивалось у основания, — шарики-фиксаторы, сужитель или чуть более тяжёлая шинка одинаково хорошо справятся. Ювелир ставит шарики за несколько минут. Выбор размера под основание означает кольцо, которое вы не наденете, а это более серьёзная проблема.
How do I know my ring size in half and quarter sizes?
US and Canadian sizes step in halves as standard, and in quarters for finer work — a quarter size is about 0.2 mm of inside diameter. UK sizes step in halves too, written as a letter and a half, like L½. Most mass-market retailers stock whole and half sizes only, so a quarter-size result is best read as a signal for which of the two neighbouring half sizes to order. Bespoke makers will work to a quarter size if you ask.
How do I get my ring size measured properly?
For a ring you cannot return — a wedding band, anything custom — get sized on a steel mandrel at a jeweller. They slide graduated steel rings onto the finger and read the fit directly, which takes screen calibration out of the equation entirely. It is free at most shops and takes two minutes. Use this tool to know what to expect before you walk in, to sanity-check the number you are given, and for everything you are buying online where a shop visit isn’t practical.
How do I tell a retailer my ring size when buying online?
Give the size in their own system, and add the inside diameter in millimetres if there is a notes field. Retailers’ charts are not always identical — some round differently, and some list a “size 7” that is really an ISO 54 — so a millimetre figure removes the ambiguity. Check the returns policy on resizing before you order, and if the band is 6 mm wide or more, tell them the width so they can allow for it.
How do I measure my ring size with just a ruler?
Lay an existing ring on a flat surface and measure straight across the inside, edge to edge through the centre — that is the inside diameter in millimetres. Finding the true centre line by eye is the hard part, and half a millimetre of error is already more than half a size, so take three readings at different angles and use the largest. If you have only the finger and no ring, wrap a paper strip round it and measure the strip instead: a ruler cannot read a curve.
How do I tell what size a ring is?
Look inside the band first. Many rings are stamped with their size next to the metal mark — a number for US sizing, a letter for UK, sometimes a bare “54” for ISO. If the stamp is worn or absent, measure the inside diameter and convert. Be careful with second-hand and inherited rings: a ring that has been resized usually keeps its original stamp, so the number inside can be a size or two away from what it now measures.
How do jewellers measure ring size?
With two tools. A ring stick, or mandrel, is a tapered steel cone marked with sizes — an existing ring slides down it until it stops, and the mark at that point is the size. A set of ring gauges is a keyring of graduated steel bands, tried on the finger one at a time until one fits. The mandrel measures rings; the gauges measure fingers. Both are physical standards, which is precisely what an online sizer is calibrating itself towards.
How do I find out my ring size?
Four steps, about two minutes. One: calibrate the screen by matching the on-screen outline to a bank card, a coin or a sheet of paper. Two: choose whether you are measuring an existing ring or a bare finger. Three: adjust the on-screen circle or band until it matches, viewed square to the screen rather than at an angle — viewing angle is the single most common source of error. Four: read the result, which comes with a confidence range and the equivalent size in every major national system.
Can I check my ring size online?
Yes — this page is that tool. There is nothing to install and no account to create: you calibrate the screen once against a known object, measure, and the conversion runs entirely in your browser. Expect roughly ±0.4 of a US size when measuring an existing ring and ±0.65 from a bare finger, which is close enough for most purchases and worth confirming at a jeweller for a wedding band. Your calibration is saved in your own device’s storage so you do not have to repeat it.
Can I check my ring size on my phone?
Yes, and a phone is how most people use this. Two phone-specific notes. First, if you are calibrating with paper, fold an A4 or Letter sheet in half twice so it fits the screen, and tell the sizer you have done so. Second, check that browser zoom is at 100% and that you are not in reader mode or a forced desktop-site view — both change the physical size of a CSS pixel and invalidate the calibration. Screen protectors are fine; a heavily cracked screen is not, so use the printable sizer in that case.
How accurate is an online ring sizer?
A properly calibrated screen sizer gets you to roughly ±0.4 of a US size when you measure an existing ring, and around ±0.65 when you measure a bare finger. The limit isn’t the maths — it’s physical. At a typical screen density one pixel of misalignment is already about a fifth of a size, and a card held slightly off the flat reads short. We show you the range on every result rather than printing a bare number.
Why do I have to calibrate the screen at all?
A browser has no way of knowing the physical size of your display. The same image is a different number of millimetres on a phone, a laptop and a 4K monitor. Any sizer that draws a circle without asking you to calibrate first is guessing — and a chart printed at the wrong scale is worse than no chart.
I don’t have a bank card. What else can I use?
A coin from your own currency works well — pick yours from the list and we use its published diameter. So does a sheet of A4 or US Letter, folded in half twice if you’re on a phone. You can also use a ruler, or let us pre-fill the scale from your device model and confirm it. Card ownership isn’t universal, and a sizer that assumes it isn’t really global.
Does browser zoom break the measurement?
Yes, and it’s a common cause of wrong sizes elsewhere. Zooming changes the physical size of a CSS pixel, so a calibration done before you zoomed is no longer valid. Our sizer watches for the change and tells you to recalibrate instead of silently handing you a wrong number.
What’s the difference between US, UK and EU ring sizes?
They measure different things. A US size is a position on a scale that steps by exactly 0.8128 mm of inside diameter. A UK size is a letter on a scale that steps by 1.25 mm of circumference. An ISO/EU size simply is the inside circumference in millimetres. Because the steps differ, whole sizes in one system rarely land on whole sizes in another — a US 6 is a British L½, not a round letter.
How do I find someone’s ring size without them knowing?
Borrow a ring they already wear on the right finger and measure its inside diameter — that’s the most reliable route by a wide margin. If you can’t, press one of their rings into a bar of soap or plasticine to capture the inner edge, or trace round the inside on paper. Failing that, compare their finger to your own and measure yours. Average adult sizes are US 6–6.5 for women and US 9–10 for men, but treat that as a fallback, not a plan.
Should I size up for a wide band?
Usually, yes. A wide band contacts more of the finger and wears tighter at the same internal diameter. Below about 4 mm it makes no practical difference. At 6 mm go up about a quarter size; at 8–9 mm about half. Our sizer applies this for you when you set the band width — and it works in the other direction for comfort-fit interiors, which run large.
I’m between two sizes. Which do I pick?
Go up, in almost every case. A slightly loose ring can be sized down, padded, or fitted with sizing beads. A ring that won’t clear your knuckle is unwearable, and forcing it off risks a trapped finger. The exception is a very wide or very heavy band, where a loose fit will spin and slide — there, favour the snugger size.
What time of day should I measure?
Late afternoon or evening, at normal room temperature, when your hands are neither cold nor swollen. Fingers are smallest first thing in the morning and after cold exposure, and largest after heat, salt, exercise or a long flight. Measuring at your daily average gives a ring that fits for most of your waking hours.
Do ring sizes differ between my two hands?
Usually. The dominant hand tends to be slightly larger, often by about half a size. Measure the exact finger on the exact hand the ring will live on — and remember that fingers on the same hand differ too.
Which countries’ sizes do you support?
All eleven of the major national standards: the United States and Canada, the UK and the Wheatsheaf countries, ISO 8653 Europe, France, Germany and the Netherlands, Russia, Italy and Spain and Switzerland, Brazil, Japan, China, and India. Every one is computed from that country’s published definition rather than looked up in a table, so the conversions stay internally consistent.
Is my measurement sent anywhere?
Your measurement isn’t. The calculation runs entirely in your browser, and your calibration is stored only in your own device’s local storage so you don’t have to redo it — there’s no account and no upload, and no size, finger measurement or calibration value ever reaches us. Like most sites we do count page views, using Google Analytics, which records that a page was opened and can’t see what you measured on it. The privacy policy sets out exactly what that collects and how to switch it off.
Can I trust a printed ring sizer?
Only if you check its scale first. “Fit to page” is on by default in many print dialogs and quietly shrinks the sheet by a few percent, which is enough to shift every size on it by more than a full size. Our printable sizer includes a 50 mm square to measure before you cut anything out.
What if my finger is between sizes because of a large knuckle?
Size so the ring clears the knuckle, then stop it spinning at the base — sizing beads, a ring guard, or a slightly heavier band all work. A jeweller can fit beads in minutes. Sizing for the base instead means a ring you can’t get on, which is the worse failure.
Всё ещё не уверены?
Измерьте двумя разными калибровочными предметами и посмотрите, совпадают ли результаты. Если да — ваше число надёжно. Если нет — измеритель подскажет, какой шаг повторить.